There is a problem of choosing the Best Subwoofer according to your room or car size and other requirements?
I will try to help you with the choice!
A subwoofer is one of the most important components of any home audio system or home theater system. The reproduction of bass, as well as various special effects, like thunder and explosions, depends on it. For maximum comfort of listening to music or watching movies, all these sounds should be reproduced without distortion, as close as possible. Read our best subwoofer reviews and we’ll tell you about the main differences between the subwoofers, which will help you choose the best among the options available on the market in 2017-2018.
Subwoofers were allocated in a separate rating of the audio system primarily because of their purpose – reproduction of low frequencies approximately in the range of 20-200 Hz. The choice of a subwoofer is a complicated process. Thus, certain details and specificities you should know.
There are three types of subwoofer performance: closed or sealed, vented and bandpass. Each type has its advantages and disadvantages. You can’t ignore the design of the cabinet when choosing a subwoofer because it has a strong effect on its acoustic properties.
This type of subwoofers is characterized by the simplest design. The driver is built in a closed box. They do not leak sound from the emitting surface. Such models are most often recommended for listening to music because it produces very clear bass. However, there is a drawback of such a product – the level of the bass depends on the cabinet size. The fact is that the low-frequency head of diffuser in such models is more loaded with the sound pressure arising in the case, and its mobility and efficiency decrease. In a case of small dimensions, you won’t get a very deep bass.
In the vented subwoofers, the driver is located in the housing, on one side of which it has a bass reflex port. Such models are able to produce much lower bass than the closed low-frequency speakers, since the diffuser’s stroke increases. Vented subs are much more whimsical as it’s more difficult to tune it, otherwise, the speaker starts to buzz. They are designed for both music and movies, but vented subwoofers are more suitable for large rooms since they have a high volume.
Bandpass is a 2-volume case, between which the speaker is located. One space is necessary for placing the bass reflex, and the second one is the same closed box. This type of enclosure provides the lowest bass and maximum sound pressure. But it can’t draw the clarity of musical compositions. Bandpass is perfect for home theater systems because it provides the feeling when your sofa vibrates.
The subwoofer enclosure must be solid, otherwise, its vibration will generate frequencies that will give undesirable sound. So, in addition to the type of housing, the material of which this case is made is also important for subwoofers. There are a large number of varieties of plywood, many of which are not acceptable for a subwoofer enclosure. Ordinary plywood is not thick enough as it gives distortion of sound, but multilayer plywood is an excellent material for small subwoofers.
A high-density 16 mm thick particleboard is probably the best choice for a powerful subwoofer, as it has the highest density and weak resonance qualities. The medium density fiberboard is also suitable for subwoofers, but you should take into account that it absorbs moisture.
There are 2 types of subwoofers according to the type of action
- Active subwoofers are models with a built-in amplifier and an active crossover. The latter is responsible for high-pass filtering and makes the matching of the low-frequency driver with the rest of the acoustics simpler.
- Passive subwoofers are models with no amplifier. They are connected either to a separate input of the amplifier or to the main speakers. With this connection, the amplifier gets an additional load. But this is not the only drawback. Passive crossovers can create a negative impact on the sound quality. Also, the passive subwoofer does not have the additional ability to adjust the sound, so it is better to take them seriously in different rooms.
An important factor is the size of the woofer. The length of a diffuser’s stroke and part of the nonlinear distortions depend on the dimensions of the model cabinet. The most common sizes of subwoofers that are recommended for home use: 10-inch, 12-inch, and 15-inch. There are no compact models with a thick and juicy bass. Same subs, which in comparison to others are small in size, lose their volume and sound quality. The 10-inch option is too small for large living rooms and can’t cover the necessary range. If you have enough space, it is worth choosing a larger sub. With other things being equal, it will sound better.
So, in fact, the choice of a subwoofer that has the necessary characteristics for your audio system, interior design, and acceptable dimensions is not an easy task. Decide on your own requirements and remember that models with the same technical characteristics may vary in size, the case material, and so on.
List Of Best Car Subwoofers
- Kicker 40CWRT122 CompRT-Series Car Subwoofer
- Power Rating: 1000 Watts Peak / 500 Watts RMS
- Impedance: 2-Ohm
- True shallow-mount subwoofer good for compact cars or even motorcycle saddlebags
- Suitable for the trickiest installations
- Dynamic Balance driver technology for pure, distortion free sound.
- Polymer woofer cones and butyl rubber surrounds will not break down over time and will survive the rigors of harsh automotive environments.
- Measuring only 3.325" deep these subwoofers will fit just about anywhere
- frequency response: 22-150 Hz
- polypropylene woofer cone with rubber surround
- MAX Power Handling: 1500 Watts per sub (6000 Watts Total)
- RMS Power Handling: 750 Watts per sub (3000 Watts Total)
- Frequency Response: 23Hz - 3kHz
- Efficiency (1 Watt/1 Meter): 96 dB
- Voice Coil Diameter: 2"
- NEW BOSS P126DVC 12" 4600 Watt Car Subwoofers (Pair)
- 2300 Watt MAX (4600 Watt PAIR)
- 1150 Watt RMS (2300 Watt PAIR)
- DUAL 4 Ohm Voice Coils
- Poly Injected Cone
List Of Best Home Theater Subwoofers
- Powered subwoofer with 12-inch injection molded long throw woofer; BASH designed amp
- Patented BIC "Venturi" vent eliminates port noise
- Adjustable crossover, adjustable volume control, automatic signal sensing
- 12-Inch cellulose-fiber cone is both strong and light
- Powerful 400-watt amplifier
- A JBL computer-optimized bass-reflex port provides deeper bass and less turbulence
- Matches other speakers in the JBL ES line
- MDP amplifer with more dynamic headroom for high levels of bass impact
- 10-inch high quality long throw driver
- 2-inch dual layer copper wound voice coil reduces distortion
- Home decor friendly compact cabinet
- Front-Firing 12" Long-Throw Powered Subwoofer with state-of-the-art BASH amplifier
- 1000 Watts Dynamic Peak Output, 250 Watts RMS Continuous
- Frequency Response: 22Hz - 200Hz, adjustable crossover & volume controls
- 10" spun-copper Cerametallic woofer
- All-digital amplifier delivers 450 watts of dynamic power
- Front-firing slot port with exclusive internal flare technology.
- L/R line-level/LFE RCA inputs for compatibility with most receivers
- 12" Composite Bass Driver Delivers Deep, Powerful Bass
- 150w Continuous/300w Dynamic Power Amp
- Slot-loaded Vent Improves Bass Response With Lower Distortion
- Line Level & Speaker Level Inputs
- Auto On/off Saves Energy When Not In Use
- 8-inch multi-range driver with magnetic shielding
- High 100 W dynamic power
- Low (28-200Hz) frequency response
- Linear Port for minimizing extraneous noise
- Front-firing active subwoofer
- 12" High Performance Powered Subwoofer
- 150 Watts RMS, 200 Watts Peak
- 50 ~ 250 Hz Frequency Response
- Powerful 100 Watt internal amplifier for controlled bass at any volume level high or low
- 8" long throw woofer allows for lower frequencies than traditional woofers
- Crossover and Phase Adjustments to perfectly blend subwoofer with your speakers